Catch Basins are generally Traffic Load Structures used to collect storm surface water. The water is generally disposed of through knockout or holes to an outlet pipe. Watertight boot connections are sometimes required.
Kistner provides all NYSDOT catch basin standards.

IMPORTANT ENGINEERING NOTICE
For the proper design of catch basin six feet or greater, inside bottom to top in depth: structures should be designed as “Catch Basin-Manholes”. A “Catch Basin – Manhole” is more economical for deeper structures because of availability of riser sections to meet depth requirements. Pipe openings are accommodated by use of standard knockouts or holes. Slab tops are manufactured for traffic loads with square or rectangular openings to accommodate grate size.

Kistner has available 4′, 5′, 6′, 8′, or 10′ diameter “Catch Basin – manholes” to accommodate specific project requirements.

• 24″ Square Stock Catch Basin x 2′ Deep

  

• 24″ Square Stock Catch Basin x 3′ Deep

  

• 24″ Square Stock Catch Basin x 4′ Deep

  

• 24″ Square Stock Catch Basin x 4′-6″ Deep

  

• 24″ Square Stock Catch Basin x 5′-6″ Deep

  

• 24″ Square Stock Catch Basin x 6′ Deep

  

• 24″ Special Manufactured Catch Basin

  

• 30″ Square Stock Catch Basin x 3′ Deep

  

• 30″ Square Stock Catch Basin x 4′-6″ Deep

  

• 30″ Square Stock Catch Basin x 5′-6″ Deep

  

• 30″ Square Stock Catch Basin x 6′ Deep

  

• 30″ Special Manufactured Catch Basin

  

• 24″ Square I.D. Catch Basin x 2′-6″ to 6′ Detail with Square and Round Frame & Grate Options

  

• 30″ Square I.D. Catch Basin x 3′-6″ to 6′-6″ Detail  with Square and Round Frame & Grate Options

  

• 36″ Square I.D. Catch Basin x 4′ to 5′-6″ Detail  with Square and Round Frame & Grate Options

  

• Catch Basin Manhole

  

• DOT Style Catch Basins: Standard Sheets 1-4

  

• Outlet Structure

  

• Transverse Drainage Interceptor

  

• NYSDOT- CB/DI Manhole-Catch Basin Per NYSDOT 706-04

  

Related Products